Sunday, April 24

Somebunny to Love

Just (barely) in time for Easter, a cute bunny buddy to make for a little one in your life.

Materials Used

  • 1 oz worsted weight cotton in bunny color (color A)
  • 2.5 oz worsted weight cotton in afghan color (color B)
  • small amount of stuffing material, less than 1 oz polyester filling
  • F crochet hook (3.75 mm)
  • G crochet hook (4.25 mm)
Optional
  • size 1 steel crochet hook (2.75 mm)
  • 60 yards size 10 cotton thread
  • small amount of yarn or embroidery floss for facial features
  • yarn or thread needle
Gauge

With F hook, 9 sc and 9 rows = 2”
Gauge is not crucial to this pattern, but checking your gauge will allow you to estimate the size of your completed project.

Finished Size

12" from top of ears to bottom corner of afghan

Special Stitches

Decrease (decr) [Slip hook under FRONT LOOP ONLY of next stitch, yo, and draw loop onto hook] twice, yo and draw through all 3 loops on hook. Counts as 1 sc.
Topstitch (tst) Starting with a loop on the hook and holding yarn on RIGHT SIDE of fabric only, slip hook through stitch, yo, and draw loop onto hook, yo and draw through both loops on hook. Begin second stitch by slipping hook into the opening from which the working yarn extends.

Notes
  1. For bunny ears and head, rounds are worked in a continuous spiral; do not join at the end of any round. Afghan rounds are joined with slst, which are also used to advance working yarn to the starting point for the next round.
  2. Pattern is written to attach ears and afghan during stitching rather than after all items are complete. Each part can be crocheted separately and joined as usual by following alternate instructions in Round 11 of head and Foundation Round of Afghan.
  3. The basic afghan directions include a simple sc border. A variation for the more delicate lace border can be found at the end of the pattern.
Ears

Make 2.
Round 1 In A with F hook, work 4 sc into an adjustable ring and pull end of yarn to tighten. (4 sc)
Round 2 2 sc in each sc around. (8 sc)
Round 3 [2 sc in first sc, sc in next sc] around. (12 sc)
Round 4 [Sc in first sc, 2 sc in next sc, sc in next sc] around. (16 sc)
Rounds 5-8 Sc in ea sc around. (16 sc)
Round 9 Decr, sc in ea sc around. (15 sc)
Round 10 Decr, sc in ea sc around. (14 sc)
Round 11 Decr, sc in ea sc around. (13 sc)
Round 12 Decr, sc in ea sc around. (12 sc)
Round 13 Decr, sc in ea sc around. (11 sc)
Round 14 Decr, sc in ea sc around. (10 sc)
Round 15 Sc in ea sc around. (10 sc)
Round 16 Repeat Round 15.
Tie off and flatten ear, folding along line of decr.

Head

Head is worked from the nose to the back of the head.
Round 1 In A with F hook, work 6 sc into an adjustable ring and pull end of yarn to tighten. (6 sc)
Round 2 2 sc in each sc around. (12 sc)
Round 3 [Sc in first sc, 2 sc in next sc, sc in next sc] around. (16 sc)
Round 4 [2 sc in first sc, sc in ea of next 3 sc] around. (20 sc)
Rounds 5 [Sc in ea of first 2 sc, 2 sc in next sc, sc in ea of next 2 sc] (24 sc)
Round 6 [2 sc in first sc, sc in ea of next 5 sc] around. (28 sc)
Round 7 [Sc in ea of first 3 sc, 2 sc in next sc, sc in ea of next 3 sc] (32 sc)
Round 8 [2 sc in first sc, sc in ea of next 7 sc] around. (36 sc)
Rounds 9-10 Sc in ea sc around. (36 sc)
Round 11 Attach ears: Sc in ea of first 12 sc. Align one flattened ear in front of the next 5 sc, keeping the decr edge to the RIGHT and the tip of the ear down. Start to attach right ear by slipping hook through first front and back sc on the ear, then through the next sc in Round 10; draw a loop through all three stitches and complete sc as usual. Repeat for next 4 sc to completely attach right ear. Sc in ea of next 2 sc. Align left ear in front of the next 5 sc, keeping the decr edge to the LEFT and the tip of the ear down. Attach left ear in the same manner as right ear over the next 5 sc. Sc in ea remaining 12 sc around. (36 sc)
Alternately, repeat Round 10 and attach ears with yarn needle after stuffing head.
Round 12 Sc in ea sc around. (36 sc)
Round 13 [Sc in ea of first 2 sc, decr, sc in ea of next 2 sc] around. (30 sc)
Round 14 [Decr, sc in ea of next 3 sc] around. (24 sc)
Round 15 [Sc in first sc, decr, sc in next sc] around. (18 sc)
Round 16 [Decr, sc in next sc] around. (12 sc)
Tie off, leaving a 12" tail for sewing. Weave in ends left inside the head. Stuff and gather final stitches on remaining tail with yarn needle. Pull tight, tie off, and weave in end. If desired, sew on facial features using yarn or embroidery floss.

Afghan

I found this pattern a bit complicated to describe, but it's a simple granny-square design, worked into a triangle.
Foundation Round Starting at the back, in B with G hook, work 18 tst in a ring around the bottom of the head, where the bunny's neck would be. Join to first tst with a slst. (18 tst)
Alternately, ch 10 and join into a ring with slst. Work Round 1 into ring and attach to head after completing afghan.
Round 1 Ch 1. Sc in first tst, ch 1 (count as first hdc). Hdc in ea next 2 tst, ch 3, hdc in ea next 3 tst. [Ch 2, hdc in ea next 3 tst, ch 3, Hdc in ea next 3 tst] twice. Ch 2 and join to first hdc with slst. Slst in ea of next 2 hdc. (6 3-hdc fans)
Round 2 Sc in ch-3 space, ch 1 (count as first hdc). 2 hdc, ch 3, 3 hdc in same ch-3 space. Ch 2, skip next 3 hdc, 3 hdc in ch-2 space (fan made). Ch 2, skip next 3 hdc, {fan, ch 3, fan} in ch-3 space (corner made). Ch 2, fan in ch-2 space. Ch 2, corner in ch-3 space. Ch 2, fan in ch-2 space. Ch 2 and join to first hdc with slst. Slst in ea of next 2 hdc. (9 fans)
Round 3 **Corner in corner, ch 2, [fan in ch-2 space, ch 2] twice. Repeat from ** around. Join to first hdc with slst. Slst in ea of next 2 hdc. (12 fans)
Round 4 **Corner in corner, ch 2, [fan in ch-2 space, ch 2] 3x. Repeat from ** around. Join to first hdc with slst. Slst in ea of next 2 hdc. (15 fans)
Round 5 **Corner in corner, ch 2, [fan in ch-2 space, ch 2] 4x. Repeat from ** around. Join to first hdc with slst. Slst in ea of next 2 hdc. (18 fans)
Round 6 **Corner in corner, ch 2, [fan in ch-2 space, ch 2] 5x. Repeat from ** around. Join to first hdc with slst. Slst in ea of next 2 hdc. (21 fans)
Round 7 **Corner in corner, ch 2, [fan in ch-2 space, ch 2] 6x. Repeat from ** around. Join to first hdc with slst. Slst in ea of next 2 hdc. (24 fans)
Round 8 **Corner in corner, ch 2, [fan in ch-2 space, ch 2] 7x. Repeat from ** around. Join to first hdc with slst. Slst in ea of next 2 hdc. (27 fans)
Round 9 **Corner in corner, ch 2, [fan in ch-2 space, ch 2] 8x. Repeat from ** around. Join to first hdc with slst. Slst in ea of next 2 hdc. (30 fans)
Round 10 **Corner in corner, ch 2, [fan in ch-2 space, ch 2] 9x. Repeat from ** around. Join to first hdc with slst. Slst in ea of next 2 hdc. (33 fans)
Round 11 **Corner in corner, ch 2, [fan in ch-2 space, ch 2] 10x. Repeat from ** around. Join to first hdc with slst. Slst in ea of next 2 hdc. (36 fans)
Round 12 **Corner in corner, ch 2, [fan in ch-2 space, ch 2] 11x. Repeat from ** around. Join to first hdc with slst. (39 fans)
For a more delicate edging, tie off yarn here and follow lace variation directions below.
Round 13 Ch 1. Sc in ea of first 3 hdc, 5 sc in ch-3 space, [sc in ea of next 3 hdc, 2 sc in ch-2 space] 12x. **Sc in each of next 3 hdc, 5 sc in ch-3 space, [sc in ea of next 3 hdc, 2 sc in ch-2 space] 12x. Repeat from ** around. Join to first sc with slst. (204 sc)
Round 14 Ch 1. Sc in ea of first 5 sc. [3 sc in next sc, sc in ea of next 67 sc] repeat. 3 sc in next sc, sc around. Join to first sc with slst. (210 sc)
Tie off and weave in ends.

Lace Edging Variation

Follow basic afghan instructions through Round 12.
Round 13 In cotton thread with size 1 steel hook, make 2 sc in ea st (hdc or ch) around. Join to first sc with slst. (396 sc)
Round 14 Ch 1, sc in first sc, ch1 (count as 1 hdc). Hdc in next sc, ch 1. [Skip next sc, hdc in ea of next 2 sc, ch 1] around. Join to first hdc with slst. (396 st)
Round 15 Skip first hdc, sc BETWEEN first 2 hdc, skip second hdc, 3 hdc in ch-1 space. [Skip next hdc, sc between 2 hdc, skip next hdc, 3 hdc in ch-1 space] around. (528 st)
Tie off and weave in ends.

3 comments:

  1. You might be interested in a pattern I had worked up for me: http://www.eisenbrauns.com/pages/04012011

    ReplyDelete
  2. Andy, Hee hee. :) It's perfect, should I ever need to go undercover as an ancient Assyrian.

    On a side note, I almost marked your comment as spam before I realized it was you. Usually when people send me links I "might be interested in" they're trying to sell me something I don't want.

    ReplyDelete
  3. this is fabulous! And would be great for various charity projects!

    ReplyDelete

Sorry--I've had to close comments down because I've been getting so much spam.

Note: Only a member of this blog may post a comment.